JOBS – March, 2015


Please see below opportunities and send resume as an attachment to wd_darshana at hotmail dot.  My imminent openings are for Senior Electrical, Mechanical, Quality and Software Engineering and for Technician – all with strong medical device experience.  Please also notice contract opportunities at the end.  All US opportunities are for US based and local candidates.  Opportunities exist in China that are open to all and you can see description in my previous blog at http://bit.ly/15STeDw specific one is for Director of Analytical R&D in Suzhou, China. When sending a resume, please mention job you are interested in, in the subject line and in the email include a brief summary of how best the job description matches your background and where the gaps are.

.jobs -- Cut To The Chase

.jobs — Cut To The Chase (Photo credit: Wikipedia)

Senior Electrical Engineer – Austin/ San Antonio – TX

A company working on innovative range of products, has an immediate opening for senior electrical engineer with class III device experience.  Experience with closed loop, analog design hardware, microcontrollers, actuators  and ultra low power consumption circuit design highly desired.

Key Responsibilities
* Lead Electrical Engineering, primarily for long-term implantable drug delivery devices:
* on R&D- design and development of implantable and associated wearable and external hardware using mixed signal- analog and digital techniques, sensors and actuators and closed-loop control systems
* Manufacturing including process development, qualification and validation, IQ, OQ, PQ, part/component selection, sterilization and packaging development and validation esp for implantable electronics
* Develop Class III implantable electronics to be compliant with regulatory and QA standards (FDA and ISO), as well as be power-efficient, reliable for multi-year operation and pass EMI/RFI, be hermetically sealed and packaged and interface with rest of electronics systems for developed products
* Establish reliable suppliers and partners for manufacturing
* Work in a matrixed and multidisciplinary organizational structure to support multiple projects and technologies following appropriate QA system for each segment
* Document work output and use project and organizational documentation systems, including electronic systems
* Plan for and support existing and projected growth of the company.

Key Qualifications
* Designed and implemented electronics mixed-signal hardware, firmware and software for implantable medical devices and drugs. Combinatorial device and Class III experience desirable. 10-15 15 years desirable
* Bachelor’s degree in Electrical Engineering or in an equivalent field required
* Led and grown EE groups with a hands-on, leadership- by-example approach
* Demonstrated working experience and accomplishments with electronics hardware and software- analog/digital, sensors/actuators. Developed, selected and qualified sensors for both implantable device function and for measuring physiological parameters
* Familiarity and experience with other implantable device components such as connectors, leads, cables, interconnects, headers, electronics packaging, communication protocols and standards. Real-time microcontroller programming a plus.
* Excellent and demonstrated grasp and use EDA tools: sensor/circuit design, simulation, layout. Hands-on re: circuit and system prototyping and development
* Developed and implemented manufacturability, and related process flows and controls. Selected and qualified vendors for manufacturing Class III implantable device electronics.
* Working knowledge of biomaterials, drugs, drug delivery, and mechanical technologies in support of multidisciplinary teams: engineering, biological, manufacturing, regulatory, intellectual property, clinical and business.
* Strong technical and hands-on skills with demonstrated ability to provide solutions to a variety of technical problems of varying scope and complexity
* Analytical data-driven problem solver and team player, organized and an excellent communicator
* Supported multiple complex projects in a start-up environment: able to prioritize.

Key Job Parameters
* Full-time position located near Austin/ San Antonio, Texas
* Some travel (~10%) may be necessary to meet job responsibilities
* Report to VP, Product Development

Senior Mechanical Engineer – Austin/ San Antonio – TX   &   San Jose, CA

A company working on innovative range of products, has an immediate opening for senior mechanical engineer with class III device experience at San Antonio, TX location and at San Jose, CA location.  See details below.

Key Responsibilities
* Hands-on support of Mechanical Engineering, primarily for long-term implantable drug delivery devices:
on R&D- design and development of implantable leads, cans, headers, and overall packaging and assembly of dynamic sensors, actuators, electronics and batteries for long-term (multi-year) use. Develop surgical tools and accessories for implantable systems.
* Manufacturing including materials (plastics, metals) and parts/system selection and qualification, process development: qualification and validation, IQ, OQ, PQ, part/component selection, sterilization and packaging development and validation especially for implantables
* Develop Class III implantables from all aspects of Mechanical Engineering to be compliant with regulatory and QA standards (FDA and ISO) including development and implementation of test fixtures and protocols
* Establish reliable suppliers and partners for manufacturing
* Work in a matrixed and multidisciplinary organizational structure to support multiple projects and technologies following appropriate QA system for each segment
* Document work and input into project documentation systems, including electronic systems
* Plan for and support existing and projected growth

Key Qualifications
* Designed and implemented long-term active implantable medical devices. Combinatorial device and Class III experience desirable. At least 10 years experience, >15 years desirable
* Bachelor’s degree in Mechanical Engineering or in an equivalent field required
* Led and grown ME groups with a hands-on, leadership- by-example approach
* Demonstrated working experience and accomplishments with implantable plastics and metals for connectors, leads, cables, interconnects, headers, electronics packaging, sensors/actuators, and batteries.
* Excellent and demonstrated grasp and use of ME computer-based tools and techniques: SolidWorks, FEA (thermal, strength/structure), 3-D modeling and printing
* Developed and implemented manufacturability, process flows and controls, and selected qualified vendors to manufacture Class III implantable devices using prototyping manufacturing as well as for mass-manufacturing
* Working knowledge of biomaterials, drugs, drug delivery, and electronics technologies and working on multidisciplinary teams: engineering, biological, manufacturing, regulatory, intellectual property, clinical and business.
* Strong technical and hands-on skills with demonstrated ability to provide solutions to a variety of technical problems of varying scope and complexity
* Analytical data-driven problem solver and team player, organized and an excellent communicator
* Supported multiple complex projects in a start-up environment: able to prioritize.

Key Job Parameters
* Full-time position located near Austin/ San Antonio, Texas
* Some travel (~10%) may be necessary to meet job responsibilities
* Report to VP, Product Development

Senior Software/ Algorithm Engineer – Fremont, CA

A company providing innovative diagnostic & therapeutic products &  services to enable interventionalists in providing superior patient care, has an immediate opening for Senior Software Engineer, in Fremont, CA.  Position Summary: This position will be responsible for developing the next generation of image processing algorithms for company’s revolutionary medical devices for cardiovascular business. Individual will participate in object-oriented software development projects using C++ and Qt for a Linux environment. Communicate effectively, as well as to present information to a group in a professional manner. Work cooperatively as part of a team with people from various facilities and technical backgrounds.

Primary Duties and Responsibilities:
Design, develop, and optimize next generation image processing algorithms
Perform lab research and algorithm testing
Develop multi-threaded software for desktop applications
Design code for maintainability and unit tests
Identify, evaluate and mitigate technical project risks
Support formal verification and validation process and participates in transfer of products from R&D to manufacturing
Team player working in a geographically distributed team
Accurately estimate time and resources for completion of specific features/project
Assist in maintaining ISO certification and 510(k) submission requirements

Qualifications & Required Skills:
Minimum BS degree in Computer Science, Computer Engineering, Electrical Engineering, Applied Math, Biomedical Engineering, or related field; Strong background in image processing; 5+ years of software development experience; Excellent coding skills in C/C++; Proficiency in MATLAB; Experience designing object-oriented and distributed software; System level architecture design experienc; Experience with source code management systems like GIT, SVN, Clear Case

Preferred
Experience developing software for medical device applications for user interaction and control
Experience with medical imaging algorithms like segmentation, co-registration, 3d reconstruction
Experience with python, DICOM, OpenGL graphics
Other: * Travel requirements are moderate. Travel to facilities would be about 2 – 3 days duration each trip with total travel expected to be less than 20%.

Please submit resume at wd_darshana at hotmail dot com, with answers to following questions in the email.  This is client HR’s requirement. 
Please provide information on your formal education:
Please describe your software engineering experience as it relates to design, proof-of concept, detailed design, code, unit and integration testing:
Please describe your experience utilizing UML modeling language, DiCom, MFC, BOOST, STL and C++ :
Do you have experience working Linux OS environment? If yes, provide more detailed information:

Senior Design Engineer with Embedded Hardware & Firmware Skills – Santa Clara, CA

A reputed contract engineering company has an immediate full time opportunity for  a Senior Design Engineer with Embedded Hardware & Firmware Skills.  A rounded individual is desired who has an interest and ability in a wide range of technologies.  The successful candidate will lead a group of engineers from time-to-time and may be required to act as the primary interface to the customers at times.  The company designs devices, firmware, and software for other companies and has a reputation for quick response with high quality work.  The person must enjoy working with customers and have good communication skills.  The person must work well on a team of high performing engineers.  The person needs to be organized.  The person must work well with others and be flexible as schedules and priorities change.

Technical requirements: Ten years of experience in embedded system design engineering is required.  Ability to supervise others is highly desired.  The person should have experience designing circuits with microprocessors from PIC to ARM, FPGAs, Bluetooth, and WiFi as well as experience with programming in C or C++ on these devices.  The person must enjoy learning and be able to learn quickly.  The ability to design and program FPGAs is desired.
This could be a work-at-home job, or work at the company site, in Santa Clara, CA.

QUALITY ENGINEER – Santa Cruz, CA

Summary:  Medical device design and manufacturing company, located near Santa Cruz, CA, focusing on custom injection molded plastic parts, has an immediate opening for Quality Engineer.  Position focus is on providing support in the development and maintenance of company’s quality systems, support activities related to the development and qualification of new product development for medical device components and assemblies as well as supporting existing products.
Responsibilities
* Write FMEAs, review and write protocols and reports for new products
* Ability to multitask on a variety of Quality System compliance and improvement initiatives in a hands-on dynamic environment and be involved with the design, procurement, validation and qualification activities including test, inspection and medical device contract manufacturing service processes.
* Responsible for the facility measurement equipment calibration and maintenance program.
* Collects, collates and analyzes manufacturing data for warranty and nonconformance to determine and report product quality trends.
* Conducts analysis of inspection and tests of a routine degree of complexity and provides recommendations accordingly. Develops quality control inspection requirements and techniques to achieve measured improvement. * Implements the Failure Analysis Process for internal and external nonconforming product to determine appropriate corrective action.
* Support Receiving, In- process and Final Inspection of various components and subassemblies for medical device products to support quality compliance and shipment goals as workload requires.
* Assist in the development and implementation of Quality System processes.
* Attend various product meetings with Engineering, Sales, Support, Marketing, and customers to address product requirements, customer concerns and training issues. Work toward and support Company/Department/Team goals including; QSR and ISO compliance, revenues, training utilization, customer satisfaction, and others as appropriate.
* Qualify and implement document changes involving product or process changes
* Coordinate the reporting, analysis, and resolution of material non-conformance incidences
* Provide support in the timely resolution of product complaints and/or safety issues
* Conduct quality audits and develop subsequent preventive action programs
* Assist Regulatory Affairs Department in the preparation of audits and reports for regulatory agencies.
* Perform Supplier Quality Audits and, as appropriate, Internal Quality System Audits; identify root cause of non-compliance and ensure timely/effective corrections and lor corrective preventative actions are implemented
* Drive effective root cause corrective action through internal and supplier surveillance and corrective action requests.
* Report MRB performance metrics and maintain corrective action database.
* Review and report in-process data from manufacturing processes and facilitate corrective and preventive actions

Requirements: 5 – 7 years’ experience in Quality, medical device, regulatory, and or a medical device manufacturing environment; BS in Bachelor of Science in Quality, Business, Mechanical Engineering, Engineering or related field; Certification, CQE, CQA a plus; Experience as an ISO Lead Auditor desirable; Must be able to communicate effectively at varying technical levels with a customer audience; Hands-on manufacturing experience in mechanical or medical device assemblies. CMM, MicroVu, Vision Systems Programming experience; Working knowledge of U.S. and international medical device regulations is desirable Working knowledge of desktop computer office software, Visio Tools, CAD software and e-mail is required; Excellent verbal and written communication skills; Flexibility to handle multiple tasks and meet timelines; Excellent analytical and problem-solving skills combined with a strong technical presence.

Senior Quality Engineer – Austin/ San Antonio – TX

A company working on innovative drug delivery technology has an immediate opening for senior quality engineer. Great opportunity to work at grounds level and grow into leadership role, in addition to the upside of stocks.

Key Responsibilities:
* Lead QA for: R&D- design, development, V&V phases including hazard/risk analysis and mitigation, DOE and related statistical design and analyses, GDT, design reviews, audits/compliance; Manufacturing including process development, qualification and validation, IQ, OQ, PQ, part/component selection, sterilization and packaging development and validation
* Develop and implement QA systems to be compliant with applicable international and national standards such as ISO 13485 and regulatory requirements of FDA CFR 820 and other bodies for Class III implantables
* Implement productive relationships with R&D and manufacturing suppliers and partners
* Work in a matrixed organizational structure to support company’s facilities, including the respective incubated companies, projects and technologies with an appropriate QA system for each segment
* Educate colleagues and support in-house uptake & implementation of these systems organization-wide* Support the following functions: Regulatory Affairs: provide appropriate documentation and materials to support filings for US and international trials and approvals; Intellectual Property: supporting documentation; Business and Commercialization, including due diligence documentation
* Develop & implement documentation systems for these business functions, including electronic systems, with help of to –be-hired Documentation Specialist

Key Qualifications
* Designed and implemented QA systems for implantable medical devices and drugs. Combinatorial device and Class III experience desirable. At least 10 years experience, >15 years desirable*
* Bachelor’s degree in Engineering or in an equivalent field required, with ASQ certification (CQE, CRE, CQM, CSSBB) desirable
* Led and grown QA organizations with a hands-on, leadership- by-example approach
* Demonstrated working experience with electronics hardware and software, biomaterials, drugs, drug delivery, and mechanical technologies while supporting multidisciplinary teams: engineering, biological, manufacturing, regulatory, intellectual property, clinical and business.
* Excellent and demonstrated grasp and use of statistics in R&D and manufacturing including DOE
* Supported multiple complex projects and start-ups: able to prioritize.
* Developed and implemented design controls, documentation, and design procedures, protocols
* Developed and implemented manufacturability, and related process flows and controls, and selected qualified vendors to manufacture Class III implantable devices
* Strong technical skills with demonstrated ability to provide solutions to a variety of technical problems of varying scope and complexity
* Analytical data-driven problem solver and team player, organized and an excellent communicator

Key Job Parameters
* Full-time position located in Austin/ San Antonio, Texas
* Some travel (~10%) may be necessary to meet job responsibilities
* Report to VP, Product Development

Electro-Mechanical Technician – Fremont, CA

A company that develops advanced injection technologies to simplify the complexities of the cardiac cath lab, has an immediate opening for R&D technician.

Requirements
* 9 years of electromechanical technician experience
* 2 year Technical School degree in electromechanics or related field or a combination of education and experience
* 2 years of computer aided design experience
* 2 years experience directing and leading the work of others
* Problem solving skills with the ability to interpret drawings, schematics, and specifications
* Experience using CAD-3D Modeling
* Effective verbal and written communication skills
* Moderate level of computer experience including MS Office Suite and SolidWorks
* Demonstrated experience using a multimeter, soldering iron, oscilloscope, and spectrum analyzer
* High degree of organization skills and high attention to detail
* Ability to prioritize and handle multiple tasks
* Ability to work independently with limited supervision
* Proficient at specifying and evaluating electrical components based on performance, lifetime, and availability
* Demonstrated project management experience
* Demonstrated test report-writing experience

Preferred
* 4+ years of computer aided design experience, * SolidWorks Proficient, * Experience providing technical support to circuit board manufacturing assembly, * Demonstrated knowledge of and familiarity with embedded systems and RF electronics, * Product development experience in a federally regulated engineering environment (FDA, ISO), * Experience defining, writing, and conducting test plans and reports.

Job Description & Responsibilities
Performs specified electromechanical engineering support activities under the guidance of an Engineer or Technical lead related to electro-mechanical design of medical device technologies, product and performance testing, and continuous improvement of the product design. The position is responsible for design, fabrications, assembly, validation, and implementation of development products and fixtures to support the design transfer of products into manufacturing operations.

Primary Duties and Responsibilities:
* Designs fixtures and test methods for validating product design and performance. Responsible for managing the ordering and delivery of fixture components and items from vendors or the internal Model Shop.
* Executes testing and validation protocols, records and analyzes data, and provides written reports to engineering team.
* Supports Product Development efforts at early stages up to design transfer. Provides support to engineers throughout the implementation and development cycles.
* Performs hands on activities such as design validation, pre-production assembly, testing and other technical activities to assist in product development.
* Assists engineers in identifying and resolving hardware design issues. Diagnoses the cause of electrical failures of circuit boards and operational equipment.
* Uses Solid Works CAD system to sketch and design fixtures and devices ensuring form, fit and functional requirements are met. Responsible for basic analysis of design in partnership with an Engineer.
* Responsible for initiating documentation changes and providing redlines to maintain the product information structure. Communicates issues and opportunities to engineering department to ensure bill of material (BOM’s), prints, process, forms, records, etc. are relevant and up to date.

Technical Engineering Support:
* Partners with Designers and Engineer, to develop and improve products, designs, fixtures, and process activities in the interest of continuous improvement and establishment of a Lean environment.
* Initiates design changes and coordinates the change order process to release product per the company’s Quality Management system. Responsible to maintain the design and information structure for use in the ERP system and engineering data base (PDM) DB Works. e.g.; BOM’s, prints, process, forms, records etc.
* Implements changes and maintenance of PDM and CAD systems as required. Assists IT and Technical Documentation Writer in annual CAD system updates, user rights management, and data base management. Creates and edits DB-Works and Solid Works API programs.

IF interested, please send resume with answers to the questions below. The client will only accept resumes, if the questions are answered.
Describe your formal education:
Describe your experience working in medical device or a regulated environment.
Give an example of a work situation where you had minimal supervision and it was critical to work within a fluid or flexible environment.
Describe your experience with developing test fixtures and methods to evaluate a product and/or technology.
Describe your experience developing or using different types of CAD models (or Computer-Aided Design), electrical schematics, or other types of models. (New Q)
Give an example of a product and/or technology project where you had to apply both mechanical and electrical/electronic skills.

 

Advertisements

, , , , , , ,

  1. Leave a comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: